Skip to content

EnviroFry Offers Seattle Do-Your-Own Mold Tests with Scotch Tape Lift Sampling, Pictures, Lab Report

October 10, 2014

EnviroFry announces its “do your own” mold testing service with lab analysis and analysis report of collected samples and submitted mold pictures for homeowners and other property owners, managers, and tenants in the Seattle and Tacoma, Washington, metropolitan area.

EnviroFry_0.jpg

Montrose, MI, October 09, 2014(PressReleaseCircle) — “Homeowners, other property owners, managers, and tenants everywhere in the Seattle and Tacoma, Washington, metro area can now identify and quantify at low cost the toxic mold species types that may be infesting their buildings by using the do-it-yourself EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol,” announces EnviroFry co-manager Phillip Fry.

Fry is a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Environmental Inspector, and Certified Remediation Specialist, who serves homeowners and other property owners, managers, and tenants in Seattle, Tacoma, Bellevue, Bothell, Burien, Des Moines, Edmonds, Everett, Federal Way, Issaquah, Kent, Kirkland, Lakewood, Lynnwood, Marysville, Parkland, Puyallup, Renton, Redmond, Sammamish, Shoreline, South Hill, and elsewhere in western Washington.
The do your own mold testing protocol includes these steps:

1. Lift Tape Sampling

The property owner, manager, or tenant uses inexpensive, clear, transparent, sticky, one inch (2.54 cm) wide adhesive tape, such as Scotch® brand or similar tape that is cut into three inch (7.6 cm) long strips to collect the mold samples. Complete Scotch tape lift sampling instructions are provided at www.moldexpertconsultants.com/diy_mold_testing.htm.

Scotch tape lift sampling is an easy, inexpensive, and effective way to do mold sampling anywhere in Washington State when a person—

(a) Sees mold growing on a wall, ceiling, floor, carpeting, furniture, heating/cooling duct register, or other surface;

(b) Wants to know whether a particular stain, discoloration, growth, or mystery substance on the wall or another surface is actually toxic mold;

(c) Smells possible mold odors (caused by the digestive gas emitted by mold eating the home, building, or contents) and wants to test a number of surfaces upon which elevated levels of airborne mold spores may have landed or been deposited, such as on walls, window sills, window and door trim, refrigerator top, kitchen cabinet tops, undusted furniture, heating/cooling duct registers, and the return air filter in the heating/cooling system; and/or

(d) Wants to test the inside walls of heating/cooling ducts for the possible presence of elevated levels of mold spores.

2. Take and Submit Pictures of Water Damage and Mold Growth

To supplement the collected lift tape samples, the property owner, manager, or tenant takes close up pictures with a smart cell phone or digital camera of any visible building water damage or mold growth, as well as pictures of the entire building, room, and areas from which the close up photographs were taken.

3. Send Lift Tape Samples and Mold Pictures to Phillip Fry for Lab Analysis and Fry’s Written Report Analyzing the Lab Results and Pictures

Up to three different collected lift tape samples (or alternatively, 2 inch by 2 inch physical samples of the actual mold growth itself as cut from mold-infested building materials or other surfaces such as carpeting), along with the lab “chain of custody form” available at www.moldexpertconsultants.com/diy_mold_testing.htm, are then mailed (or sent via FedEx or an alternate delivery service) to EnviroFry, 10104 Sheridan Rd., Montrose, Michigan 48457, USA, along with the a check or money order for U.S. $200 payable to EnviroFry, or, alternatively, credit or debit card payment by sending money via www.paypal.com to the PayPal email payment address of phil@moldinspector.com.

Each lift tape sampling or physical mold sampling above the first three is only U.S. $35.00 per sampling to be lab analyzed.

Mold, building, and room or area pictures should be sent either as actual developed photographs to the company address, or, preferably, as email attachments to phil@moldinspector.com.

Within five business days after EnviroFry’s receipt of the lift tape samplings and the mold pictures, Phillip Fry will provide via email: (a) the mold lab results from a nationally-accredited mold analysis lab; (b) Fry’s written analysis, opinion, and report as to the extent and severity of the mold infestation, as evidenced in the submitted samples and mold pictures; (c) Fry’s specific suggestions on how any discovered mold problem can be removed and remediated effectively, safely, and affordably.

Read Fry’s recommended ten steps for effective mold removal at www.moldinspector.com/mold_removal.htm.

For more information about the EnviroFry Scotch Tape Lift Sampling & Mold Pictures Testing Protocol, please email Phillip Fry phil@moldinspector.com or phone toll-free (USA and Canada) 1-866-300-1616 or 1-810-639-0523 (worldwide), or cell-phone 1-480-310-7970 (worldwide), or visit www.moldexpertconsultants.com or www.buildingmoldinspection.com.

Contact:
Phillip Fry, Co-Manager
EnviroFry
10104 Sheridan Rd.,
Montrose, Michigan 48457
Phone Toll-Free (USA and Canada) 1-866-300-1616
Cell-Phone (Worldwide) 1-480-310-7970
phil@moldinspector.com
http://www.moldexpertconsultants.com or
http://www.moldinspector.com

Advertisements

From → Home

Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: